bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

18 RA Replacing Return Line For Power Steering|Page 1002 > < 17 RA Replacing Cooler Return Line For Power Steering (M57T2)|Page 1000
Page 1
background image

32 41 351

Replacing return line for power steering

Warning!

Danger to life!

Mount securing fixture for vehicle on lifting platform to prevent
the vehicle from slipping off or tilting down.

Secure engine in installation position to prevent it from falling
down.

Warning!

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Close off pipe connections with plugs.

Recycling:

Catch and dispose of hydraulic fluid in a suitable container.

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

Lower front axle support

M57T2: Remove pipe between intercooler and manifold

RA  Replacing return line for power steering

BMW AG - TIS

05.02.2013  05:10

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

18 RA Replacing Return Line For Power Steering|Page 1002 > < 17 RA Replacing Cooler Return Line For Power Steering (M57T2)|Page 1000