X Series E70 X5 3.0Sd (M57T2) OFFRD
32 43 010
Removing and installing/replacing control
unit for active front steering
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove front left wheel arch cover (rear section)
Release nut (1) and disconnect ground cable.
Disconnect plug connections (2).
Unclip cable holder (3).
Installation:
Replace damaged cable holder.
Release nuts (1, 2).
Tightening torque 32 43 1AZ
.
Remove active front steering control unit (3).
RA Removing and installing/replacing control unit for active front steering
BMW AG - TIS
05.02.2013 05:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
