X Series E70 X5 3.0Sd (M57T2) OFFRD
Necessary preliminary tasks:
•
Remove rear differential
•
Lower rear axle carrier
Withdraw rubber mount with special tools 33 5 166 , 33 5 163
, 33 5 162 , 33 5 161 , 33 4 466 and 33 4 465 .
Note:
Milled recess of special tool 33 5 162 must point outwards to
rear axle carrier.
Use ratchet ring wrench 33 5 105 .
Important!
Coat bearing bushing in rear axle carrier and rubber mount
with Circolight (refer to BMW Parts Service).
Align rubber mount horizontally by way of slots (1).
Insert rubber mount (1) in special tool 33 5 164 .
Draw in rubber mount (1) with special tools
33 5 165 ,
33 5 164 , 33 5 163 , 33 4 466 and 33 4 465 as far as it will
go.
Note:
Use ratchet ring wrench 33 5 105 .
RA Replacing all front rubber mounts for rear differential mounting
BMW AG - TIS
05.02.2013 05:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -