X Series E70 X5 3.0Sd (M57T2) OFFRD
Important!
No oil permitted on shaft journal thread!
Lightly oil spline teeth of output shaft.
Insert output shaft into drive flange.
Screw special tool 33 2 118 / 33 2 119 onto output shaft.
Mount special tool 33 2 116 with three wheel studs to drive
flange.
Draw in output shaft with special tool 33 2 115 up to stop; in so
doing, grip basic body 33 2 116 with special tools 33 2 202
and 33 5 070 .
RA Pressing output shaft out of drive flange and drawing in (output shaft removed f
BMW AG - TIS
05.02.2013 05:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -