X Series E70 X5 3.0Sd (M57T2) OFFRD
Clean tee head guides (1) and apply a thin coating of Plastilube.
Note:
After completing work:
-
Fully depress brake pedal several times so that brake pads
contact brake discs.
-
When installing new brake pads at front and rear axles, brake
fluid level must be brought up to "MAX" marking.
-
Read and comply with notes on braking in new brake discs /
brake pads.
-
When replacing pads, reset CBS display in accordance with
factory specification.
RA Removing and installing/replacing brake pads on both disc brakes (2 pistons)
BMW AG - TIS
05.02.2013 05:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -