X Series E70 X5 3.0Sd (M57T2) OFFRD
Clean contact surface (3) of brake caliper and apply a thin
coating of Plastilube.
Clean brake caliper holder at tee head guides and apply a thin
coating of Plastilube.
Note:
After completing work:
-
Fully depress brake pedal several times so that brake
pads contact brake discs.
-
When installing new brake pads at front and rear axles,
brake fluid level must be brought up to "MAX" marking.
-
Read and comply with notes on braking in new brake
discs / brake pads.
-
If necessary, when replacing pads, reset CBS display in
accordance with factory specification.
RA Removing and installing or replacing brake pads on both rear disc brakes (Teves
BMW AG - TIS
05.02.2013 06:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
