X Series E70 X5 3.0Sd (M57T2) OFFRD
Disconnect plug connection (1).
Release nut (2) and disconnect jointed rod.
Installation:
Sensor lever (3) must point from ride-height sensor to left front
wheel.
Replace self-locking nut.
Tightening torque 37 14 4AZ
.
Release screws (1) and remove holder (2).
Tightening torque 37 14 3AZ
.
After installation:
•
Carry out ride-height-calibration
•
Check headlight adjustment, correct if necessary
RA Replacing front ride-height sensor
BMW AG - TIS
05.02.2013 09:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -