X Series E70 X5 3.0Sd (M57T2) OFFRD
Open weld joints in area (1).
Roughly cut lower C-pillar reinforcement along line (1).
Open weld joints in area (2).
Preparation of new part:
Mark new part (rear wheel arch outer half) in accordance with
severance cut on vehicle + 20 mm extra material and cut (1).
Weld new part in area (2) overlapping.
RA Replacing complete rear left wheel arch (rear left side panel removed)
BMW AG - TIS
05.02.2013 10:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -