X Series E70 X5 3.0Sd (M57T2) OFFRD
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in area (1).
Remove middle lashing rail mounting (2).
View from below:
Open weld joints in area (1).
Carry over the work step shown symmetrically to the other side of
the vehicle.
Mark severance cut (1) in accordance with measurement a and
cut.
Dimension a = 10 mm
Open weld joints in area (2).
Carry over the work step shown symmetrically to the other side of
the vehicle.
Mark severance cut (1) in accordance with previous severance cut
and cut.
Installation:
Adjust new parts to fit with straightening attachment or universal
mount.
Weld in reinforcing panels at all severance cuts.
RA Replacing complete rear luggage compartment floor (tail panel removed)
BMW AG - TIS
05.02.2013 10:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -