X Series E70 X5 3.0Sd (M57T2) OFFRD
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in areas (1).
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in areas (1).
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in areas (1).
Installation:
Insert inner rear trim (1) at an angle and bring into position.
Adjust lower rear lid section to fit before welding new parts.
RA Replacing outer and inner tail panel sections
BMW AG - TIS
05.02.2013 10:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -