X Series E70 X5 3.0Sd (M57T2) OFFRD
Open weld joints in areas (1).
Important!
Burn hazard!
Remove cavity acoustic baffles in area (3).
Installation:
Apply window glass adhesive to cavity acoustic baffle (2).
Make cavity acoustic baffle (3) with cavity foam.
Mark severance cut (1) in accordance with measurement and cut.
Important!
Cut outer metal sheet only.
Dimension a = 20 mm
Open weld joints in area (2).
RA Replacing rear left outer wheel arch section (rear left side panel removed)
BMW AG - TIS
05.02.2013 10:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -