X Series E70 X5 3.0Sd (M57T2) OFFRD
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 260 mm from roof edge
Measurement b = approx. 420 mm from centrepoint of hole dia. 20 mm.
Severance cut (c) in centrepoint of 15 mm dia. hole
Open weld joints in areas (1) and (4).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffles (2) and (3).
In area (3) move cavity acoustic baffle approx. 20 mm downwards.
-
Weld in reinforcing panels at all severance cuts.
-
Bond and rivet new part in area (4).
Use Hemlock 813 blind rivet (sourcing reference: BMW Parts Service picture board - Aluminium and
steel/bonding and welding).
Double number of rivets with respect to welding spots in area (4).
RA Replacing rear left side panel (partial replacement, longitudinal member cover b
BMW AG - TIS
05.02.2013 10:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -