X Series E70 X5 3.0Sd (M57T2) OFFRD
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer metal sheet only.
Measurement a = 260 mm from roof edge
Measurement b = approx. 200 mm from middle of lower lock striker screw point.
Severance cut (c) in centrepoint of 15 mm dia. hole
Open weld joints in areas (1).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffle (2).
In area (3) move cavity acoustic baffle approx. 20 mm downwards.
-
Weld in reinforcing panels at all severance cuts.
Open weld joints in areas (1).
Open brazed joint in areas (2).
RA Replacing rear left side panel (partial replacement before longitudinal member c
BMW AG - TIS
05.02.2013 10:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
