X Series E70 X5 3.0Sd (M57T2) OFFRD
41 61 000
Removing and installing hood/bonnet
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 61 000).
Warning!
Danger of injury!
Support engine hood in fully opened position with suitable
apparatus.
Important!
Removal of the hood/bonnet must be carried out with the
assistance of a second person.
Note:
Carry over schematic representation to the relevant vehicle type.
Release nuts (1).
Tightening torque 41 61 1AZ
.
Remove hood lid.
Installation:
Install engine hood at screw locations to on hinge. This dispenses
with the need for adjustment after installation.
If this is not possible, adjust engine hood.
RA Removing and installing hood/bonnet
BMW AG - TIS
05.02.2013 10:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -