X Series E70 X5 3.0Sd (M57T2) OFFRD
Check read lid wedge (1) on left and right for damage, replace if
necessary.
Check rear lid stop (1) on body on left and right for damage,
replace if necessary.
If necessary, adjust rear lid stop (1) to wedge.
Loosen screw (2).
Open luggage compartment lid and slacken nuts (3).
Tightening torque 41 62 9AZ
.
To adjust height of rear lid upper section, turn screw (2) in stop.
After installation:
•
Tighten all screws and nuts to specified torque.
•
Touch up unpainted surfaces in the appropriate colour.
•
If reversing camera optional extra installed:
Calibrate reversing camera.
RA Adjusting rear lid upper section
BMW AG - TIS
05.02.2013 10:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -