X Series E70 X5 3.0Sd (M57T2) OFFRD
51 16 375
Removing and installing/replacing kinematic
unit for glovebox lid
Necessary preliminary tasks:
•
Remove lock for glovebox lid on left
Note:
Kinematic unit for glovebox lid consists of reversing lever and
damping element with spring.
Close glovebox lid.
Release tab washer (1) and remove pin (2).
Release pin (3).
Remove reversing lever (4).
Installation:
Replace tab washer (1) and pin (2).
Disconnect spring (1).
Release screw (2).
Feed damping element (3) out of holder (4).
RA Removing and installing/replacing kinematic unit for glovebox lid
BMW AG - TIS
05.02.2013 11:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
