X Series E70 X5 3.0Sd (M57T2) OFFRD
41 63 003
Replacing cover bowl
Necessary preliminary tasks:
•
Remove right rear wheel
•
Remove rear right wheel arch trim
•
Remove flap for fuel filler neck
•
Remove servodrive for tank filler flap
Note:
Carry over schematic representation to the relevant vehicle type.
Important!
Deformation of the sheet metal flanges in the side panel and
the wheel arch results in permanent vehicle leakage. Carry
out removal/installation with great care.
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) Filler bowl
Turn sleeve (1) through approx. 45
°
and pull out in direction of
arrow.
RA Replacing cover bowl
BMW AG - TIS
05.02.2013 11:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -