bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing_replacing Carrier For Outside Door Handle On Left Or Rig > < 5 RA Removing And Installing_replacing Door Lock In Left Or Right Rear Door|Page 1720
Page 3
background image

Installation:

Install door lock and insert screws (1), do not tighten down.

Slide special tool 51 2 190  into opened rotary latch until

latch engages in first stage.

Installation:

Pretension door lock (1) with knurled screw (2) until special

tool 51 2 190  just contacts corner points (3).

Important!

To tension door lock (1), it is only permitted to turn knurled
screw (2) by a further 1 to 1.5 turns (max.) (risk of
damage).

Door lock seal must rest uniformly on inner door plate (water
ingress).

Tighten down door lock screws, tightening torque 

51 22 1AZ

.

Installation:

Carry out function check of child lock (1) and door lock (2) with
door opened.

RA  Removing and installing/replacing door lock in left or right rear door

BMW AG - TIS

05.02.2013  11:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

6 RA Removing And Installing_replacing Carrier For Outside Door Handle On Left Or Rig > < 5 RA Removing And Installing_replacing Door Lock In Left Or Right Rear Door|Page 1720