X Series E70 X5 3.0Sd (M57T2) OFFRD
Important!
If retaining spring (2) is damaged!
Release pins (1).
Remove spindle drive (4).
Remove ball socket (3).
Remove retaining spring (2) and replace if necessary.
Concluding tasks:
•
Mechanically teach in end stops for rear lid:
1.
Lower end stop: Close rear lid (lower end stop is
determined when the rear lid contact of the rear lock
changes from open to closed)
2.
Upper end stop: Open rear lid completely (rear lid must
be moved up to upper stop); if necessary, press by hand
or by means of diagnosis.
•
After completing work, check adjustment of rear lid opening
angle and re-establish adjustment if necessary.
RA Removing and installing/replacing electric spindle drive for rear lid on left or
BMW AG - TIS
05.02.2013 12:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -