bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Adjusting Rear Lid Latch For Rear Lid Lower Section|Page 1747 > < 1 RA Adjusting Rear Lid Latch For Rear Lid Upper Section
Page 1
background image

51 24 015

Adjusting rear lid latch for rear lid lower
section

Prerequisite:

Lower rear lid section  correctly adjusted to fit

Unclip trim (1) on left/right.

Installation:

Catches on trim (1) must not be damaged.

Close lower rear lid section (3) and make sure it is correctly
engaged in striker (1) on left/right.

Loosen left/right screws (2).

Press on lower rear lid section (3) until mucket (4) of rear lid (3)
is slightly compressed.

Tighten down screws (2).

Tightening torque 51 24 3AZ

.

Check closing comfort, repeat procedure if necessary.

Observe gap dimensions.

Note:

No grating noises must be heard when the closed rear lid is
pressed slightly.

RA  Adjusting rear lid latch for rear lid lower section

BMW AG - TIS

05.02.2013  12:07

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Adjusting Rear Lid Latch For Rear Lid Lower Section|Page 1747 > < 1 RA Adjusting Rear Lid Latch For Rear Lid Upper Section