X Series E70 X5 3.0Sd (M57T2) OFFRD
51 48 070
Removing and installing/replacing sound
insulation on left or right rear door
Necessary preliminary tasks:
•
Remove rear door trim panel
If necessary, disconnect plug connection (1).
Using a scalpel, cut through sealing bead (3) of sound
insulation (4) completely or if necessary partially.
Feed wires (2) out of sound insulation (4).
Installation:
Ensure clean bonding and that there are no leaks at sealing bead.
Installation:
In case of replacement or partial detachments, lay butylene tape
(sourcing reference: BMW Parts Service) depending on the
conditions on inner door panel or sound insulation.
Seal cable penetrations with butylene tape.
Note:
Position of butylene tape (1) on sound insulation (2).
RA Removing and installing/replacing sound insulation on left or right rear door
BMW AG - TIS
05.02.2013 12:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -