bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing_replacing Front Left Or Right Wheel Arch Cover (front Se|Page 1911 > < 6 RA Removing And Installing_replacing Top Right Steering Gear Cover
Page 1
background image

51 71 038

Removing and installing/replacing front left or
right wheel arch cover (front section)

Necessary preliminary tasks:

Remove front wheel

Remove trim on front wheel arch 

 

Note:

 Work shown on the X5 3.0d by way of example; there may be
differences in detail on other models.

Release expander rivets (1) and screws (2, 3).

Release expander rivet (1) and nut (2).

Release screws (3, 4).

Feed out wheel arch cover in downward direction.

Important!

Make sure all covers in wheel arch are correctly seated in
relation to each other:

Rear cover (1) overlaps front cover (2)

Cover (4) overlaps rear cover (1)

Cover (3) overlaps covers (2, 4) and rear cover (1) in
area (A)

Left side only:

Rear cover (1) overlaps cover (3) in area (B).

RA  Removing and installing/replacing front left or right wheel arch cover (front se

BMW AG - TIS

05.02.2013  13:10

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing_replacing Front Left Or Right Wheel Arch Cover (front Se|Page 1911 > < 6 RA Removing And Installing_replacing Top Right Steering Gear Cover