X Series E70 X5 3.0Sd (M57T2) OFFRD
Version with OC3 mat:
-
OC3 mat must not be kinked under any circumstances.
Detach all retainers in side area from longitudinal wires (1).
Pull trim wires (1) forward out of seat cover.
Carefully fold back seat cover and release retainers from cross-
wires (2).
Remove seat cover from padding.
Important!
Remove all remnants of clips from seat cover and padding.
Detach cable strap (3).
Unlock plug connection (4) and disconnect.
Detach seat cover (2) in marked area from thigh support (1).
Installation:
Bend new retainers closed with pliers 52 0 050 .
1.
Padding
2.
Retainer
3.
Trim wire in padding
4.
Trim thread in cover
5.
Seat cover
Replacing seat cover:
Pull trim threads (1) out of seat cover (2).
Installation:
Slide trim threads (1) into new seat cover (2). If necessary, cut
mounting for trim threads.
(3)
Seat heater cable
RA Removing and installing/replacing seat cover for left or right front seat (sport
BMW AG - TIS
05.02.2013 13:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -