X Series E70 X5 3.0Sd (M57T2) OFFRD
61 12 200
Replacing wiring harness in left or right front
door
Necessary preliminary tasks:
•
Close front side window completely
•
Remove front door trim
•
Remove front acoustic insulation
Unlock plug connections (1) and disconnect.
Unclip door wiring harness at points (2).
Installation:
Make sure door wiring harness is correctly laid.
Note:
Front side panel shown removed for purposes of clarity.
Release screw (1), fold door wiring harness plug on A-pillar (2)
downwards slightly and remove.
Unlock plug connection behind and disconnect.
Pull rubber grommet (3) in direction of arrow out of front
door (4).
Feed out door wiring harness towards front to A-pillar and remove.
RA Replacing wiring harness in left or right front door
BMW AG - TIS
05.02.2013 15:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
