X Series E70 X5 3.0Sd (M57T2) OFFRD
61 12 210
Replacing wiring harness in left or right rear
door
Necessary preliminary tasks:
•
Close rear side window completely
•
Remove rear door trim panel
•
Remove rear acoustic insulation
Unfasten plug connection (1) and disconnect.
Unclip door wiring harness at points (2).
Installation:
Make sure door wiring harness is correctly laid.
Release screw (1), fold door wiring harness plug on B-pillar (2)
downwards slightly and remove.
Unlock plug connection behind and disconnect.
Pull rubber grommet (3) out of rear door.
Feed out door wiring harness towards front to B-pillar and remove.
RA Replacing wiring harness in left or right rear door
BMW AG - TIS
05.02.2013 15:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -