X Series E70 X5 3.0Sd (M57T2) OFFRD
61 31 221
Removing and installing/replacing both
multifunction steering wheel switches
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove airbag unit
Note:
Illustration shows steering wheel removed.
Release screws (1).
Note:
Both multifunction steering wheel switches (1) are connected to
each other by the wiring harness.
Disconnect plug connections (2).
Feed wiring harness (3) out of steering wheel.
Pull multifunction steering wheel switches (1) in direction of arrow
out of steering wheel.
Installation:
Make sure electrical leads are correctly routed.
RA Removing and installing/replacing both multifunction steering wheel switches
BMW AG - TIS
05.02.2013 15:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -