X Series E70 X5 3.0Sd (M57T2) OFFRD
Release screws (1).
Remove steering column switch cluster in direction of arrow.
Installation:
Carry out steering angle sensor adjustment.
On vehicles with active front steering, steering angle sensor
adjustment is performed by means of initial operation / adjustment
of active front steering.
Replacement:
•
Remove volute spring cassette
•
Carry out vehicle programming/coding
Note:
-
If replacement of the steering column switch cluster is
initiated via Progman, the steering column switch cluster
is coded indirectly via the DSC control unit
-
If coding is cancelled, first adjust the steering angle
sensor; this makes a brand-new steering column switch
cluster coding-compatible again if necessary
-
Then code the DSC control unit again
•
Carry out steering angle sensor adjustment
Note:
-
If steering angle sensor adjustment is cancelled, first
code the DSC control unit
-
Then adjust the steering angle sensor again
•
Vehicles with active front steering:
-
Steering angle sensor adjustment is performed by
means of initial operation / adjustment of active front
steering
-
If necessary, proceed in accordance with instructions
RA Removing and installing/replacing steering column switch cluster (SZL)
BMW AG - TIS
05.02.2013 15:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -