X Series E70 X5 3.0Sd (M57T2) OFFRD
Slide special tool 61 6 100 onto pin (1).
Place special tool 61 6 100 on windscreen (2) and read off
value in degrees on scale.
Note:
LHD vehicles are covered by the scale range of 0 to -10 and
RHD vehicles by the scale range of 0 to +10.
If the specified number in degrees is not correct, the wiper
arm (1) must be bent with special tool
00 9 220 at the point
shown.
RA Checking/adjusting contact angle of windscreen wiper arms on windscreen
BMW AG - TIS
05.02.2013 16:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -