bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Replacing Drive_electronics Box For Left Adaptive Headlight|Page 2504 > < 11 RA Replacing Right Ignition Unit For Right Xenon Headlight
Page 1
background image

63 12 895

Replacing drive/electronics box for left
adaptive headlight

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Warning!

Version with xenon headlights: Danger to life due to high
voltage! Therefore disconnect all components from voltage
supply before removal.

Work on the entire xenon lighting system (ignition unit, control
unit and lamp) may only be carried out by specialist
personnel.

Necessary preliminary tasks:

Remove wheel arch cover front section at front

Release screws (1).

Remove drive for adaptive headlight (2) from headlight.

 

Installation:

Fit drive for adaptive headlight (2) exactly on headlight.

Make sure pin housing (2) is correctly seated in plug
housing (3).

RA  Replacing drive/electronics box for left adaptive headlight

BMW AG - TIS

05.02.2013  16:40

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Replacing Drive_electronics Box For Left Adaptive Headlight|Page 2504 > < 11 RA Replacing Right Ignition Unit For Right Xenon Headlight