bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing_replacing Complete Electric Auxiliary Heater - 3rd Seat |Page 2608 > < 6 RA Removing And Installing_replacing Complete Independent Heater With Bracket|Page 2606
Page 1
background image

64 12 300

Removing and installing/replacing complete
electric auxiliary heater - 3rd seat row -

Necessary preliminary tasks:

Remove A/C control unit - 3rd seat row - 

Remove centre console - 3rd seat row -

The following operations are shown with the 3rd seat row
removed.

Detach Starlock washer (1) from holding rod (2).

Installation:

If necessary, replace defective Starlock washer (1).

Make sure Starlock washer (1) is correctly seated on holding
rod (2).

Slide holding rod (1) in direction of arrow out of guides and tilt
seat cushion (2) forwards.

RA  Removing and installing/replacing complete electric auxiliary heater - 3rd seat 

BMW AG - TIS

05.02.2013  17:25

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing_replacing Complete Electric Auxiliary Heater - 3rd Seat |Page 2608 > < 6 RA Removing And Installing_replacing Complete Independent Heater With Bracket|Page 2606