X Series E70 X5 3.0Sd (M57T2) OFFRD
64 52 521
Removing and installing/replacing A/C system
compressor (M57T2, with Dynamic Drive)
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Read and comply with notes on replacing compressor.
Follow instructions for opening and replacing parts in
refrigerant circuit.
If A/C system is opened for more than 24 hours:
Replace desiccant insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Remove A/C compressor drive belt
•
Remove suction pipe between air cleaner housing and
turbocharger
•
Remove right pressure pipe
•
Remove steering gear cover at bottom right
Release screw (1).
Tightening torque 64 52 3AZ
.
RA Removing and installing/replacing A/C system compressor (M57T2, with Dynamic Dri
BMW AG - TIS
05.02.2013 17:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
