X Series E70 X5 3.0Sd (M57T2) OFFRD
Release screw (1).
Tightening torque 64 52 3AZ
.
Note:
Secure compressor (5) against falling out.
First release screw (1) and remove refrigerant line.
Release screw (2) and remove refrigerant line.
Tightening torque 64 52 1AZ
.
Disconnect plug connection (3).
Release screw (4) and feed out compressor (5) towards top.
Tightening torque 64 52 3AZ
.
After installation:
•
Evacuate and fill A/C system
RA Removing and installing/replacing A/C system compressor (M57T2, with Dynamic Dri
BMW AG - TIS
05.02.2013 17:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -