bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing_replacing Left Headlight Vertical Aim Adjuster (xenon He|Page 2819 > < 2 RA Replacing Mirror Electronics For Electrically Operated Left Or Right Door Mirror
Page 1
background image

67 16 011

Removing and installing/replacing left
headlight vertical aim adjuster (xenon
headlight)

Warning!

Version with xenon headlights: Danger to life due to high
voltage!

Therefore disconnect all components from voltage supply
before removal.

Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.

Important!

Risk of injury!

Risk of damage!

Do not make any cutting movements when removing the
sprayed-on cover.

The cover may only be separated from the housing by
punching. A groove of reduced wall thickness shows the
punching line.

Cutting movements may damage cables inside the headlight.

The sealing edge must not be damaged!

Necessary preliminary tasks:

Remove wheel arch cover at front

RA  Removing and installing/replacing left headlight vertical aim adjuster (xenon he

BMW AG - TIS

05.02.2013  18:36

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing_replacing Left Headlight Vertical Aim Adjuster (xenon He|Page 2819 > < 2 RA Replacing Mirror Electronics For Electrically Operated Left Or Right Door Mirror