X Series E70 X5 3.0Sd (M57T2) OFFRD
1
Gas generator
2
Retaining screws, gas generator
3
Retaining screws, holder for folding pack
4
Folding pack, head airbag
5
Retaining screw, anchor fitting, A-pillar
Important!
When removing head airbag, do not damage
-
Head airbag
-
Windscreen
-
Retaining clips
-
Trim panels
Release screw (1) on A-pillar.
Tightening torque 72 12 2AZ
.
Release retaining screws (2).
Tightening torque 72 12 5AZ
.
Remove deformation plate (3).
Release screw (1).
Tightening torque 72 12 2AZ
.
Installation:
Folding pack is under tab washer.
RA Removing and installing/replacing left or right head airbag
BMW AG - TIS
05.02.2013 19:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
