X Series E70 X5 3.0Sd (M57T2) OFFRD
Video module has the following functions:
•
Reception of television stations
•
Power supply for aerial amplifier TV 1 and TV 2 in aerial diversity
•
Self-diagnosis
[more ...]
The Car Communication Computer (CCC) consists of the following components:
-
Housing
The size of the CCC corresponds to 2 DIN radio housings stacked one on top of the other.
[more ...]
-
CD-ROM drive
The CD-ROM drive allows the following CDs to be played:
•
Audio CD
•
CD-ROM
[more ...]
-
DVD drive
The DVD drive is used for the navigation DVD. When the navigation system is not in use, the DVD drive can
also be used to play audio CDs and CD-ROMs. [more ...]
-
HIP module
The HIP module (Host Independent Positioning) contains the GPS receiver. The GPS receiver deciphers the
navigation system signals received from the aerial.
[more ...]
-
Yaw-rate sensor
The yaw-rate sensor supplies the data for changes of direction. This data is required to identify the location more
precisely.
[more ...]
-
Two-tuner radio
The two-tuner radio consists of tuner 1 and tuner 2. Tuner 1 is able to receive AM and FM stations. Tuner 2
acts as a receiver for additional information from the Radio Data System (RDS) and from the Traffic Message
Channel (TMC).
[more ...]
-
Motherboard with processors
The motherboard holds slots for additional cards and for the memory chips for CCC applications. The following
processors are found on the CCC motherboard, which work in the same way as control units and can be flash-
programmed.
•
CCC applications (CCC-A)
•
CCC gateway (CCC-GW)
•
CCC user interface (CCC-BO)
•
CCC audio system controller (CCC-ASK)
[more ...]
-
Power board
The power board contains the 4 audio output stages for the loudspeakers and provides the power supply for all
printed circuits and modules.
[more ...]
SBT Car Communication Computer E60, E61, E63, E64, E70, E87, E90, E91, E92, E93, R56
BMW AG - TIS
06.02.2013 01:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -