X Series E70 X5 3.0Si (N52K) OFFRD
Lever out expander rivet.
Remove gasket (1).
Release screws (2).
Feed out partition (3) and remove.
Lever out expander rivet.
Release locks in direction of arrow.
Feed out fresh air duct (1) and remove.
Open retainers.
Release lock (1) in direction of arrow.
Remove cover (2).
Release screws and remove retaining bar (1).
Unlock upper section (2) of partition seal in direction of arrow and
remove.
Release grommets (3) for wiring harnesses from lower section of
partition seal and from electronics box.
Installation:
Make sure grommets are correctly seated (watertightness).
RA Replacing control unit (DME)
BMW AG - TIS
06.02.2013 10:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
