X Series E70 X5 3.0Si (N52K) OFFRD
Release screws (1) on clamping bands on left and right.
Installation:
Tightening torque 16 11 2AZ
.
Slacken nut (2).
Installation:
Tightening torque, 16 11 1AZ
.
Important!
Do not lead refuelling vent line through opening in body when
lowering.
Lower fuel tank a little so that sensor units can be reached.
Disconnect plug connection (1).
Unlock and detach quick-connect couplings (2).
Disconnect plug connection (1).
Unlock and detach quick-connect couplings (2).
Lower fuel tank.
The following components must be modified when the fuel tank is
replaced:
-
Right sensor unit (1)
-
Left sensor unit (2)
-
Fuel feed line (3)
-
If necessary, lines for independent heating
RA Removing and installing/replacing fuel tank
BMW AG - TIS
06.02.2013 11:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
