X Series E70 X5 3.0Si (N52K) OFFRD
16 11 071
Replacing rubber sleeve between fuel filler
pipe and fuel tank
Recycling
Fuel escapes when fuel lines are detached. Have a suitable
collecting container ready.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Important!
Ensure adequate ventilation in the place of work!
Avoid skin contact (wear gloves)!
Before starting the engine for the first time:
•
Fill fuel tank with at least 5 litres of fuel.
Necessary preliminary tasks:
•
Draw off fuel from fuel tank
•
Remove underbody panelling on right
•
Remove rear right wheel arch trim
Unclip line holder (1).
Slacken nut (2).
Installation:
Check plastic nut (2), replace if necessary.
Tightening torque 16 12 2AZ
.
RA Replacing rubber sleeve between fuel filler pipe and fuel tank
BMW AG - TIS
06.02.2013 11:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
