X Series E70 X5 3.0Si (N52K) OFFRD
17 22 010
Removing and installing/replacing heat
exchanger for automatic transmission
(N62TU, N52K)
Important!
Danger of scalding!
Only perform this work after engine has cooled down.
Necessary preliminary tasks:
•
Follow instructions for working on cooling system.
•
Drain coolant
•
Remove fan cowl
Recycling
Catch and dispose of drained coolant.
Transmission fluid emerges when oil lines are detached from heat
exchanger.
Catch and dispose of escaping transmission fluid.
Observe country-specific waste-disposal regulations.
RA Removing and installing/replacing heat exchanger for automatic transmission (N62
BMW AG - TIS
06.02.2013 16:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
