X Series E70 X5 3.0Si (N52K) OFFRD
18 32 081
Replacing exhaust pipe with catalytic
converter, cyl. 1-3 (N52K)
Special tools required:
•
00 2 210
Warning!
Scalding hazard!
These tasks should only be carried out on an exhaust system
that has cooled down.
Note:
If the cutting line is not marked by a punch mark in the pipe,
determine the cutting line by means of the pipe length on the new
exhaust pipe with catalytic converter (2).
Carry over cutting line to faulty exhaust pipe with catalytic
converter (2) and mark out.
Cut exhaust pipe at marked point with special tool 00 2 210 and
deburr.
RA Replacing exhaust pipe with catalytic converter, cyl. 1-3 (N52K)
BMW AG - TIS
06.02.2013 16:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
