X Series E70 X5 3.0Si (N52K) OFFRD
18 12 050
Replacing centre muffler (N52K)
Special tools required:
•
00 2 210
Warning!
Scalding hazard!
These tasks should only be carried out on an exhaust system
that has cooled down.
Note:
If the cutting line is not marked by a punch mark in the pipe,
determine the cutting line by means of the pipe length on the new
centre muffler (3).
Carry over cutting line to faulty centre muffler (3) and mark out.
Secure centre muffler against falling off.
Cut exhaust pipes at marked points with special tool 00 2 210
and deburr.
Remove centre muffler.
RA Replacing centre muffler (N52K)
BMW AG - TIS
06.02.2013 16:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
