X Series E70 X5 3.0Si (N52K) OFFRD
22 32 001
Replacing rubber mount for transmission
mounting
Special tools required:
•
22 1 016
•
22 1 017
•
22 1 101
•
22 1 102
•
22 1 103
•
33 4 465
Necessary preliminary tasks:
•
Remove cross-member for transmission mounting
Place special tool 22 1 016 on opening (1) and insert screw (2)
until hand-tight against housing.
Pull out rubber mount with special tools 22 1 101 / 33 4 465
and nut ( 22 1 017 ).
Installation:
Arrow on rubber mount must point to arrow on housing.
Coat housing bore and rubber mount with Circolight, refer to
BMW Parts Service.
RA Replacing rubber mount for transmission mounting
BMW AG - TIS
06.02.2013 17:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
