X Series E70 X5 3.0Si (N52K) OFFRD
27 21 010
Replacing radial shaft seal for drive shaft
(ATC 700)
Special tools required:
•
23 0 490
•
27 1 460
Important!
After completing work, check gear oil level and top up if
necessary.
Use only approved gear oil in this transfer box.
Necessary preliminary tasks:
•
Remove transfer box
Drive a hole into radial shaft seal (1) using a centre punch (2).
Important!
Do not use a drill as drillings may result in transmission
malfunction.
RA Replacing radial shaft seal for drive shaft (ATC 700)
BMW AG - TIS
06.02.2013 17:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
