X Series E70 X5 3.0Si (N52K) OFFRD
31 12 050
Removing and installing/replacing left or right
tension strut
Special tools required:
•
31 2 240
•
31 2 247
Necessary preliminary tasks:
•
Remove front wheel
•
Remove front assembly underside protection
•
Remove steering gear cover at side bottom
Release bolts (1).
Remove front wheel arch cover (2) from bumper trim.
Installation:
Make sure wheel arch cover is in correct position.
Release nut (1) and remove screw (2).
Remove tension strut (3) from front axle carrier.
Installation:
Replace screw and nut.
Tighten bolt connection in normal position.
Tightening torque 31 12 1AZ
.
RA Removing and installing/replacing left or right tension strut
BMW AG - TIS
06.02.2013 17:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -