X Series E70 X5 3.0Si (N52K) OFFRD
Note:
Output shaft has been removed only for the purpose of creating
the picture.
Release bolts (1) and remove wheel bearing.
Installation:
Replace screws.
Tightening torque 31 21 1AZ
.
Important!
Do not damage inner race (1) of wheel bearing.
Detach wheel bearing from output shaft (refer to Pressing output
shaft out of drive flange).
Installation:
Keep contact surface of swivel bearing and wheel bearing clean
and free from oil and grease.
RA Replacing bearing (wheel bearing) for front wheel
BMW AG - TIS
06.02.2013 17:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
