bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing_replacing Active Front Steering Power Steering Gear|Page 915 > < 4 RA Removing And Installing_replacing Power Steering Gear|Page 913
Page 1
background image

32 13 065

Removing and installing/replacing active front
steering power steering gear

Warning!

Danger to life!

Mount securing fixture for vehicle on lifting platform to prevent
the vehicle from slipping off or tilting down.

Secure engine in installation position to prevent it from falling
down.

Warning!

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Close off pipe connections with plugs.

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

Remove tie rod end on both sides from swivel bearing

Replacement only: Remove tie rod end at both ends of tie rod

Version with Dynamic Drive: Remove both stabilizer links

from stabilizer

Remove lower section of steering spindle from steering gear

Slacken screw connection for control arm at bottom left and

right on front axle carrier

Lower front axle support

Disconnect plug connection for Eco valve on back of power

steering pump

RA  Removing and installing/replacing active front steering power steering gear

BMW AG - TIS

06.02.2013  18:24

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing_replacing Active Front Steering Power Steering Gear|Page 915 > < 4 RA Removing And Installing_replacing Power Steering Gear|Page 913