X Series E70 X5 3.0Si (N52K) OFFRD
32 41 341
Replacing cooler return line for power
steering (N52, N62)
Warning!
Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off pipe connections with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove front underbody protection
Remove fluid reservoir from mounting bracket/body.
Release hose clamp (1) and detach cooler return line (2) from
fluid reservoir.
Installation:
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
RA Replacing cooler return line for power steering (N52, N62)
BMW AG - TIS
06.02.2013 18:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -