X Series E70 X5 3.0Si (N52K) OFFRD
Important!
Secure wheel carrier against falling out.
Remove integral link.
Remove guide arm from wheel carrier.
Remove upper control arm from wheel carrier.
Remove wheel carrier.
Replacement:
Modify brake carrier/brake guard plate.
Important!
Make sure spring pad is correctly installed in order to prevent
the coil spring from jumping out.
Modify lower spring pad (1). To do so, lever out upper
section (2) with a suitable tool.
After installation:
•
Activate and fill air suspension system
•
Adjusting parking brake
•
Replacement only: Perform chassis alignment check
RA Removing and installing / replacing a steering knuckle / wheel carrier
BMW AG - TIS
06.02.2013 19:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
