X Series E70 X5 3.0Si (N52K) OFFRD
33 32 155
Removing and installing/replacing rear
compression strut
Important!
Observe safety instructions for raising the vehicle
Driving without compression struts is not permitted!
Release screw (1).
Tightening torque 33 33 3AZ
.
Release screw (3) and remove compression strut (2).
Secure rear axle carrier by inserting screw (3).
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Tightening torque 33 33 1AZ
.
RA Removing and installing/replacing rear compression strut
BMW AG - TIS
06.02.2013 19:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
