X Series E70 X5 3.0Si (N52K) OFFRD
Check minimum brake disc thickness:
-
Position special tool 34 1 280 at three measuring points in
area (1) and measure.
-
Compare measurement result and lowest value with setpoint
value.
Important!
New brake pads may only be installed if the brake disc
thickness is greater than or equal to the minimum brake disc
thickness (MIN TH).
Note:
The minimum thickness of the brake disc is designed so that it
holds over the service life of a further set of brake pads if it is
greater than or equal to the minimum brake disc thickness (MIN
TH).
Check dust sleeve (2) for damage and replace if necessary.
Important!
Dust sleeve must not come into contact with anti-squeak
Plastilube as this may cause the dust sleeve to swell.
Clean contact surface (1) of brake piston and apply a thin coating
of Plastilube.
Clean contact surfaces (1) and (2) of brake pad tee heads/brake
caliper housing and coat with Plastilube.
Note:
Grease contact surfaces on brake caliper at top and bottom.
RA Removing and installing/replacing brake pads on both front disc brakes (1 piston
BMW AG - TIS
06.02.2013 19:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
